Unlock the full potential of your device with ease using the simple settings menu in the Bever app.
Here, we'll check out the various basic settings available and explain what each one does, making customization effortless.
| Applicable devices | Luci (LS downlight), Ambiente, Cubiq, | |||
| Base Output | Output percentage of your fixture | |||
| Output percentage | 0 - 100% | |||
| Motion Detection * | ||||
| Use own PIR | Use the internal PIR as indication for motion | ON/OFF | ||
| Time to dim | Time after motion when the fixture should dim | |||
| Dim Saving | Percentage of the output that it should dim back to | |||
| Use deep-dimming | Second step of dimming. Dimming even further after a certain amount of time. | |||
| Time to deep-dim | Similar to time to dim | |||
| Deep dim-saving | Similar to time to dim | |||
| Light detection | ||||
| Use own DLS | Use the internal DLS as an indicator for light. Between the minimum and maximum values, the fixture will be linearly dimmed. For example, at the exact middle of the range, the fixture will have 50% output | |||
| Off above | If the level of light observed is above this value the fixture applies maximum dimming. | |||
| On below | If the level of light observed is below this value the fixture applies minimum/no dimming | |||