This manual describes how to add the RF module to an IC-U

Recommended tools:

• ESD Field service kit / ESD wrist band

• Phillips head screw driver

WARNING
Disconnect the power before caring out any work.

NOTE:
The pictures used in this manual may differ from the actual parts used and are for reference only.

1. Open the IC-U by removing the 4 screws

2. Remove on each side of the IC-U the two outer push-in rivets.

3. Place the new RF card on the indicated headers

4. place back the screen en fix it with the four push-in rivets.

 

5 .Close the IC housing and place the RF antenna adequately.

IMPORTANT:
The antenna may not be placed directly onto metal frames.
Also make sure no metal objects are in line of sight between the I-C antenna and the Sign Controller antenna.
Place the Sign Controller antenna in line of the antenna of the IC/IC-U