It is possible to set up a time schedule to match the current (real) time with your leaf carrier.
Please note that the leaf carrier does not have an internal clock built in, so the timing is based solely on calculations. This can result in small deviations, such as a few minutes after a certain period and a number of 24-hour cycles.
Another point to consider is that the leaf carrier must remain powered on to maintain its internal clock calculations. If the power is cut, the setup needs to be reconfigured in the app and saved to the device. Resetting the internal clock on the leaf carrier is done by cutting the power completely.
The notation of time is always in 24-hour format.
Example:
If we want to set up a schedule from 1:00 AM to 17:00 (5:00 PM), follow these steps:
To set up the configuration make sure both sliders in the red circle are turned ON and follow the timestamps in the screenshot marked in orange.
- Check the Current Time:
The start time in the screenshot is the current time for example, 11:48 AM. We must first set up 17:00 (5:00 PM) because it comes before 1:00 (1:00 AM) in the 24-hour cycle.
If the current time is 20:00, set up 1:00 first because that timestamp comes first in the 24-hour schedule from 20:00 to 20:00 .
Reading the Indicators:
- In the screenshot, the blue circle indicates how many times the 24-hour configuration has passed.
- The red bar, indicated with a red arrow, shows how far into the schedule the carrier is.
If you have any further questions, please do not hesitate to contact us at support